ASTM B466 Cupro Nickel Tubes 90/10

Home Pipe & Tube ASTM B466 Cupro Nickel Tubes 90/10

ASTM B466 Cupro Nickel Tubes 90/10 Manufacturer

Karma Piping offer quality ASTM B466 Cupro Nickel Tubes 90/10

Looking for trusted vendors for ASTM B466 Cupro Nickel Tubes 90/10, Information for those interested in buying ASTM B466 Cupro Nickel Tubes 90/10

Our goal is to fulfill the highest expectations of our customers for delivery and product quality of ASTM B466 Cupro Nickel Tubes 90/10. Information for those interested in buying ASTM B466 Cupro Nickel Tubes 90/10. the most trusted source of ASTM B466 Cupro Nickel Tubes 90/10, More about Karma Piping for all Pipes & Tubes.

ASTM B466 Cupro Nickel Tubes 90/10 Manufacturer
ASTM B466 Cupro Nickel Tubes 90/10

Request for a Quote for ASTM B466 Cupro Nickel Tubes 90/10

Karma Piping is one of the major Indian manufacturers, exporter & suppliers of ASTM B466 Cupro Nickel Tubes 90/10 & OCTG, CRA (Corrosion-Resistant Alloy) Seamless Tubes, Stainless Steel , Super Duplex , Duplex , Welded & Semaless, Carbon Steel Seamless Pipes, Tubes, Capillary Pipes & ‘U’ Tubes for applications in oil & gas, LNG, Thermal & Nuclear Power Plants, Chemical Industries, Fertilizers Plants, (petro) chemical, shipbuilding, desalination, water treatment, energy industries, EPC and Pipes for General Engineering Purpose.

Karma Piping operates according to an ISO 9001:2008 certified quality programme. A complete range of testing facilities on-site contributes to consistent quality control.

 

Request for a Quote for ASTM B466 Cupro Nickel Tubes 90/10

 

 

Cupro Nickel Tubes 90/10

This form of cupro nickel tubes produced by Tube Tech possess excellent resistance to corrosion by sea water as well as high resistance to erosion corrosion and air-impingement attack. The addition of iron results in 90/10 performing as good as 70/30 in salt water service heat exchangers. These tubes have good strength and ductility at ordinary temperatures and relatively high strength and other mechanical properties at elevated temperatures.

Standards
Cupro Nickel Tube90/ 10 Standard BS2871part3 ASTM B-111 IS 1545 JIS H 3300 NFA 51 102
Symbol CN 102 C 70600 CuNi10Fe1 C7060 CuNi10Fe1Mn
Cupro Nickel Tubes 70/30 Standard BS2871part3 ASTM B-111 IS 1545 JIS H 3300 NFA 51 102
NFA 51 102 CN 107 C 71500 CuNi30Mn1Fe C 7150 CuNi30Mn1Fe

Uses of Curpo Nickel Tubes 95/5 & 90/10 for Marine Application

Curpo Nickel Tubes 95/5 & 90/10 for Marine ApplicationCurpo Nickel Tubes 95/5 & 90/10 are used for Marine industries, these tubes are very important for all Industrial fields. Karma Piping has experience in these areas more then 10 years and is able to supply these tubes in accordance with most international standards and special customer requirements. The trust-based relationships we have established with thousands of manufacturing companies and industry around the world for Curpo Nickel Tubes 95/5 & 90/10. Curpo Nickel Tubes 95/5 & 90/10 can be purchased worldwide through our International Distributor Network. We are committed to providing the highest quality Cupro Nickel Tubes.

Uses of Cupro Nickel Tubes 90/10 for Automobile Industries

cupronickeltube-for-automobileWe offer our customers an excellent quality range of Cupro Nickel Tubes 90/10 For Automobile Industries. Copper-nickel alloys have excellent resistance to marine corrosion and biofouling. Copper had been proved since the early days to have many good attributes. It was easy to bend and had very high corrosion resistance, but there was concern about its low corrosion-fatigue strength. When copper-nickel was introduced, it displayed corrosion resistance similar to copper, higher general strength and better fatigue strength. The trust-based relationships we have established with thousands of manufacturing companies and industry around the world for Curpo Nickel Tubes 95/5 & 90/10. Curpo Nickel Tubes 95/5 & 90/10 can be purchased worldwide through our International Distributor Network. We are committed to providing the highest quality Cupro Nickel Tubes. Recent tests prove that 90-10 copper-nickel tube (UNS C70600) is superior to steel tubes when run through over 120 cycles.

Copper-nickel alloys are widely used for marine applications due to their excellent resistance to seawater corrosion, high inherent resistance to biofouling and good fabricability.

Applications

  • Sea water pipework
  • Offshore fire water systems
  • Heat exchangers and condensers
  • Sheathing of legs and risers on offshore platforms and boat hulls
  • Hydraulic lines
  • Fish cages for aquaculture
  • Desalination units.

Cupro Nickel Tubes 90/10 Heat Exchangers & Condensers

heat-exchangers-and-condensers-tubes

These Cupro Nickel tubes & pipes for Heat Exchangers & Condensers are very important for all Industrial fields. Karma Piping has experience in these areas more then 10 years and is able to supply Cupro Nickel Tubes 90/10 Heat Exchangers & Condensers in accordance with most international standards and special customer requirements. Many manufacturer producing heat exchangers using standard & specialty alloys including cupro-nickel & nickel & nickel alloy.

Dimension Tolerance
Material Ultimate Tensile Strength1000 psi (MPa) Yield Strength 0.5% Ext.under Load 1000 psi (MPa) YElongation % in 2 in. Fatigue Strength (10×7 cycles) 1000 psi (MPa) Burst Pressure* 1000 psi (MPa)
Copper-brazed Steel 48-55 (0.330-0.380) 28-34 (0.190-0.235) 30-40 30 (
0.210)
19.5 
(0.135)
C12200-Phosphorus deoxidized Copper 32-38 (0.220-0.265) 10-14 (0.070-0.100) 45-60 10 
(0.070)
12 (
0.083)
C70600-Copper Nickel 90-10 48-54 (0.330-0.370) 16-22 (0.110-0.150) 40-55 15 
(0.100)
19 (
0.130)

Alloy C70600 is normally supplied as redrawn tubing in the annealed condition. The combination of strength and good ductility give excellent formability. 
As copper-nickel is softer than steel, it was first feared that fretting might be a problem. Experience has shown this is not the case.

Cupro Nickel Rods 90/10 and 95/5

Cupro Nickel Rods For 90/10

Chemical Properties
Pb 0.05 Max.
Fe 1.00 – 1.80
Mn 1.00 Max.
Zn 1.00 Max.
Cu Ag Remainder Ni Co 9.00 – 11.00

Mechenical Properties
Light Drawn
Flattening Test Reqd. (After ‘O’)
U.T.S. ksi 45.00 Min
Y.S. at 0.5% Ext. ksi 35.00 Min.
Expansion Test 30% at 60 degree Reqd. (After ‘O’)

Annealed Temper
Flattening Test Reqd.
Grain Size at 75 X mm Avg. 0.010 – 0.045
U.T.S. ksi 40.00 Min.
Y.S. at 0.5% Ext. ksi 15.00 Min.
Expansion Test 30% at 60 degree Reqd.

Cupro Nickel Rods For 95/5

Chemical Properties
Sn 0.10 Max.
Pb 0.05 Max
Ni 4.00 – 5.00
Fe 0.10 Max.
Mn 0.25 Max.
As 0.10 Max.
Cu Ag 95.00 – 96.000
Sb 0.01 Max.
Bi 0.0025 Max.
Oxygen (O2) 0.08 Max.

Mechenical Properties
Annealed
U.T.S. MPa 216 – 275 (Strip cut from Ring Tube)
%Elongation at 5.65Sq.Rt So G.L. 40.00 Min. (Strip cut from Ring Tube)
Flattening Test Reqd.
Bend Test Reqd. (180 degree close)

Packaging & Shipping

Utmost care is taken towards Packing of the ASTM B466 Cupro Nickel Tubes 90/10 so as to ensure that the resultant Coils, Foils, Tubes, Pipes and Fittings reach in the same condition as desired by our valued customers.
Packing specifications for various products are:

  • Larger Dia Fusion Welded Pipes are packed with aluminium end caps in a wooden crates.
  • S.S. Automotive Exhaust Pipes & Scheduled pipes both are packed with plastic end caps in wooden crates.
  • Cold Drawn Seamless Stainless Tubes are packed with plastic end caps in a wooden box with an inside thermocoal covering.
  • Coils and Foils are packed in wooden crates.

ASTM B466 Cupro Nickel Tubes 90/10 Packaging

Packed ASTM B466 Cupro Nickel Tubes 90/10

ASTM B466 Cupro Nickel Tubes 90/10 Packaging

Packed ASTM B466 Cupro Nickel Tubes 90/10


Other Packaging information:

  • Bundle Packing
  • Bundle Packing
  • Wooden Case
  • Wooden Case
  • Wooden Case for U Tubes
  • Reinforced by angle bar

 

Why us?

  • ASTM B466 Cupro Nickel Tubes 90/10 Manufacturer & Exporter since 1996
  • The annual capacity of the plant equals about 12.000 tons
  • Specialized in Pipes & Tubes, Stainless Steel Pipe & Carbon Steel Pipe
  • We export ASTM B466 Cupro Nickel Tubes 90/10 everywhere in the world
  • We have our own warehouse of 10,000 feet, so we can offer ASTM B466 Cupro Nickel Tubes 90/10 best price in the market

Heilights:

  • Pipes up to 24" made in continuous production from coil
  • Pipes up to 80" made from single plates
  • Maximum thickness 40 mm

Strength:

  • Contacts with major mills & stockists around the world.
  • Can offer ex-stock materials as well as mill delivery with nominal margins.
  • Complete in-house testing facilities viz. hydro, eddy current, UT, chemical analysis,
  • physical/mechanical, PMI, microscopic examination, etc…
  • Prime and genuine materials with co-relating original test certificates.

Available Stock at Karma Piping

Carbon Steel Pipes & Tubes stock at a glance:

Pipes & Tubes Stock At a Glance:-

Pipe Gradewise Stock At a Glance:-

Tube Gradewise Stock At a Glance:-

Nickel Alloys Pipes & Tubes Stock At a Glance:-

Top Sellers Pipes & Tubes At a Glance:-

List of Countries where Karma Piping supply ASTM A500/A500M Structural Round Tubing:-


List of Countries where Karma Piping supply Pipes / Tubes :-


Please note:
ASTM A312 / A312M – 13 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

 

Search for Manufacturers Suppliers of ASTM B466 Cupro Nickel Tubes 90/10 cost price factory rate surplus rate price list ends at Karma Piping, we offer better quality & better price. ASTM B466 Cupro Nickel Tubes 90/10 manufacturer, ASTM B466 Cupro Nickel Tubes 90/10 suppliers, ASTM B466 Cupro Nickel Tubes 90/10 exporter, ASTM B466 Cupro Nickel Tubes 90/10 distributor, ASTM B466 Cupro Nickel Tubes 90/10 stockists, ASTM B466 Cupro Nickel Tubes 90/10 price

[ Buy everything in Stainless Steel Pipes & Tubes ]